| CPU
|
Intel
Celeron and compatible CPUs (with system bus frequencies of 66/100
MHz) |
| CPU
Socket |
Intel
Socket 370 |
| Bus
Interface |
ISA bus |
| BIOS |
Award
256KB FLASH BIOS |
| Chipset |
Intel
440BX |
|
I/O Chipset |
Winbond
W83977. Fully 16-bit I/O decoded |
| System
Memory |
Onboard
one 168-pin DIMM socket supports up to 256 Mbytes SDRAM |
| Enhanced
IDE hard disk device interface |
Supports
two IDE devices. Supports Ultra DMA/33 mode with data transfer
rate up to 33MB/sec. |
| FDD
interface |
Supports
two floppy disk drives, 5.25" (360KB and 1.2MB) and/or 3.5" (720KB,
1.44MB, and 2.88MB) |
| Parallel
port |
One bi-directional parallel port. Supports SPP,ECP, and EPP modes |
| Serial
port |
One
RS-232 and one RS-232/422/485 serial port. Ports can be configured
as COM1, COM2, COM3, COM4, or disabled individually. (16C550
equivalent) |
| IR
interface |
Supports
one IrDA Tx/Rx header |
| KB/Mouse
connector |
6-pin
mini-DIN connector supports PC/AT keyboard and PS/2 mouse |
| USB
connectors |
One
5 x 2 header onboard supports dual USB ports |
| Battery |
Lithium
battery for data retention |
| Watchdog
timer |
Can
generate a system reset, IRQ15 or NMI. Software selectable time-out
interval (32 sec. ~ 254.5 min., 1 min./step) |
| DMA
channels |
7
DMA channels (8237 equivalent) |
| Interrupt
levels |
15
interrupt levels (8259 equivalent) |
| Power
management |
I/O
peripheral devices support power saving and doze/standby/suspend
modes. APM 1.2 compliant |
| Flat
panel /CRT interface |
| Chipset |
C&T
69000 |
| Display
memory |
Built-in
2MB SDRAM |
| Display
type |
Supports
non-interlaced CRT and LCD (TFT, DSTN, and MONO) displays. Can
display both CRT and Flat Panel
simultaneously |
| Resolution |
Up
to 1024x768@64K colors (CRT/LCD simultaneous display) |
| Ethernet
interface |
| Chipset |
Realtek
RTL8139B 10/100Base-T Fast Ethernet controller |
| Ethernet
interface |
Onboard
10/100Base-T RJ-45 connector. Optional Remote Boot ROM function |
| SSD
Interface |
One
32-pin DIP socket supports M-Systems DiskOnChip 2000 series up
to 288MB |
| Expansion
Interface |
| PC/104
connector |
One 16-bit 104-pin connector onboard |
| Mechanical
and Environmental |
| Power
supply voltage |
+5V
(4.75V to 5.25V), +12V (11.4V to 12.6V) |
| Typical
power requirement |
+5V
@ 4.1A (Celeron 300MHz) |
| Operating
temperature |
32o
to 140oF (0o to 60oC) |
| Board
size |
7.3
in (L) x 4.8 in (W)
(185mm x 122mm) |
| Weight |
0.3Kg |